Oops! It appears that you have disabled your Javascript. In order for you to see this page as it is meant to appear, we ask that you please re-enable your Javascript!

Remove old grout with oscillating machine

Remove old grout with suitable machine will help you save labor and cost. TKT Cleaning will share with you about one kind of machine could help you remove old grout with less effort, more efficient.

1. Remove old grout with oscillating machine instruction

Step 1: Scrape out stubborn chunks of grout with oscillating machine.

Fit the oscillating tool with a blade specially intended for tile or tile grout. Most tool heads will specify which materials they can be used for (metal, wood, tile, etc.).

Start by holding the tool horizontally (or vertically, in the case of vertical seams), turning on the power, and lightly pressing the blade to the grout.

Let the power tool do the work; do not force it. The blade should easily chew through the grout.

Once you have removed as much grout as possible by holding the tool horizontally, it is time to gently angle the blade to remove more grout.

Once again, working slowly and patiently will help ensure that you do not damage the edges of your tile.

One trick is to support your arm on a tool box so that it does not get tired during the process.

After you have done as much grout removal as possible with the power tool, your next line of attack is the small flat-head screwdriver.

Its head will fit into the seam and allow you to scrape out stubborn chunks of grout.

Do not try to remove every last bit; that is for the next step. Your intent is to knock out hunks that the oscillating tool may have loosened but not completely removed.

oscillating machine for removing old grout

Image: oscillating machine for removing old grout

Step 2: Switch To Utility Knife To Remove Grout

Switch To Utility Knife To Remove Grout

If you are still finding bits of grout that will not come out, switch to your dull-bladed utility knife.

You want a dull blade for two reasons.

First, it makes no sense to kill a nice, sharp blade on tile grout. Use that sharp blade for something else first.

Second, you do not want to risk snapping off the sharp point of the utility knife and getting injured.

Continually Vacuum Grout Work During and After

Remove Tile Grout

Be sure to liberally use the shop vacuum during the grout removal process so you can see what you are doing.

And of course, you will want to use it once again at the end to clean up your work site.

Oscillating machine blade tkt cleaning

Image: Oscillating machine blade tkt cleaning

2. Evaluation of oscillating machine with reciprocating saw and blade

It works effectively on the floor or wall and comes with a little risk of damaging the tile.

However, the blade of this tool is thin and may require the combination of several blades to remove all the grout.

It also requires that you buy or have a reciprocating saw.

Our Pick: Grout Grabber GG001 – Grout Removal Tool for Reciprocating Saws

Grout Grabber Grout Removal Tool for Reciprocating Saws

If you already own a reciprocating saw, you should consider adding the Grout Grabber GG001 to your collection for a quick and accurate grout removal.

This 6-inch Grout Rake features a curved cutting edge (2-inch blade) for optimum grout removing accuracy.

It has coarse carbide grit that helps in the removal of all cement-based and epoxy grout types from 1/16 inch to 1/2 inch.

You even can use this to make a relief cut that to remove a chipped or cracked tile.

Pros

  • Effective grout removal tool from any joint size
  • Handy
  • Produces a minimum amount of dust while removing grout
  • Can be used by hand, without the saw on hard to reach areas

 Cons

  • The blade wears out quickly
  • The blade is a bit costly

TKT Cleaning would like to share you some knowledge about machine and tool to remove old grout. If you are looking for an efficient tool to remove grout without chipping the tiles, the Grout Grabber might be the best way to go. It can also be used when replacing tile grout.

How to remove old grout with very simple tools

 

In this article we will instruct you how to remove old grout without expensive tools. You can remove old grout with very very simple tools you can see around your house.

When remodeling a bathroom or kitchen, the hardest part can be removing the grout from pre-existing tile. Grout is made from water, cement and sand, which hardens over time to form a rock-like material. The strength of grout is what makes tile so highly desired, as it prevents the tile from shifting. Learning how to remove grout can save you a lot of money that you would otherwise have to pay to a contractor.

1. Preparing Before Remove old grout

Get the necessary tools. There are a number of tools which you can use to remove the grout. Those you choose will depend on how much money you wish to spend, how much and which type of grout you need to remove, and how often you intend to remove grout.

You can use power tools. There are a variety of tools, called grout removal tools or re-grout tools, which will help you remove grout quickly and with much less effort. These are helpful if you have a large amount of grout to remove or remove grout often.

You can use manual tools as well. If you for some reason cannot use power tools but find that you have a reasonable amount of grout to remove, use a manual grout removal tool. This will look like a small trowel.

If you only have a small amount of grout to remove or it is something soft like rubber grout, you can use a standard razor blade, like an exacto knife or a utility knife.

Image: simple tool to remove old grout

2. Tapering

If you are planning to keep the tiles and removing just the grout, cover the edges of each tile with painter’s tape.

Cover the surfaces of the appliances you are planning to keep. As the grout is removed, flying debris can cause damage. Drape a large blanket or drop cloth over the appliances, making sure they are fully covered.

If necessary, use tape to secure the edges of the protective covering and make sure to cover drains completely.

3. Don protective clothing

Don protective clothing before starting the grout removal process. This should include safety glasses, dust mask and cut resistant gloves. For the purpose of comfort, consider wearing knee pads, as it can take a while to remove grout. Make sure to wear pants and boots as well.

4. Remove old grout Processing

Make the center incision. Make an incision down the middle of each grout line using a grout saw, preferably one with a carbide blade. Do this to all the grout lines that you want to remove.

Remove the grout. Remove the grout from between the pieces of tile with a grout scraper, using the incision as a starting point. Insert the triangular tip of the grout scraper into the incision you made with the grout saw. Apply firm pressure and drag the scraper along the grout line about the length of one tile, but be very careful to avoid scraping the tile. Lift out the grout scraper, return to the starting point and repeat the process until you have removed all the grout in that area.

If you do not have a grout scraper, use a small, cold chisel and hammer or a knife blade. Angle the chisel away from the edge of the tile and tap if with the hammer until the grout is freed from the floor and edges of the tile.

Finish the edges. Clean up the edges of the tile by chipping out any remaining grout remnants. Hold the chisel so that it is parallel to the floor and the cutting edge of the chisel is touching the edge of the tile. Lightly tap the end of the chisel with the hammer until the grout is loosened. Sweep up the broken pieces of grout from between the crevices using a dust broom or a shop vacuum.

5 Cleaning Up After Removal

Remove tape and clean grout lines. Peel off the painter’s tape from the edge of the tile, then wash out the grout lines with soap and water. You may need a scouring pad to scrub away any remaining grout from the edges of the tile. Gently scrub the edges of the tile until the grout has been completely removed.

Clean the tile. Wipe down the tile immediately if you are planning on keeping it, and then buff the area out a few times. Grout residue can quickly harden onto the tile, making it difficult to remove without damage. Fill a spray bottle with half vinegar and half water. Spray the tile and allow the solution to sit for a couple of minutes before wiping it away with a clean cloth.

Base on this article TKT Cleaning do hop that you could remove grout by yourself with very simple tool.

Source: https://tktg.vn/en/